تحسين العمليات
تحسين العمليات
Chemistry for crude pretreatment, refinery process conditions and pipeline flow. Find the relevant product category by unit and operating issue, then define the evidence needed for a treatment evaluation.
ناقش طلبك
Connect the treatment to the process
Separation, contaminant removal, foam, deposits and corrosion have different causes and treatment requirements. Review feed characteristics, the affected equipment and the existing chemical program.
A defined operating baseline helps distinguish treatment response from changes in feed, throughput or unit conditions.
استكشف فئات المنتجات
Crude-oil pretreatment additives
Crude-oil pretreatment combines separation and contaminant-removal treatments before downstream refining.
Crude-oil demulsifiers
Demulsifiers assist water separation from crude-oil emulsions during pretreatment and desalting.
إزالة الكالسيوم والحديد
Calcium and iron removal additives support crude-oil pretreatment in the desalter.
Overhead corrosion inhibitors
Corrosion inhibitors support corrosion management in refinery overhead condensing systems.
Refinery neutralizers
Neutralizers manage acidity in refinery overhead condensing systems.
مثبطات التآكل درجات الحرارة العالية
High-temperature corrosion inhibitors are considered where corrosive refinery streams affect hot process equipment.
مواد مانعة للرغوة في المصافي
Antifoams help manage foam formation in refinery processing.
Process antifoulants
Process antifoulants address deposit formation in refinery heat-transfer and process circuits.
Hydrotreating antifoulants
Antifoulant selection for hydrotreating requires a review of the stream, deposit problem and catalyst requirements.
Visbreaker and coker additives
Visbreaker and delayed-coker additive selection starts with the operating problem.
Pipeline drag reducers
Drag-reducing additives manage frictional pressure loss in hydrocarbon pipelines.
FCC slurry settling aids
Slurry settling aids assist the separation of catalyst fines and other fine solids from FCC slurry oil.
مخاملات النيكل
Nickel passivators are used in FCC operations to address unwanted catalytic effects of nickel carried with the feed.
خاملات الفاناديوم للتكسير الحفزي السائل
Vanadium passivators support metals management in FCC operations where feed contaminants affect the catalyst.
مناقشة اختيار المنتج
شارك التطبيق وظروف التشغيل والمتطلبات التي تهم تقييمك. يتم توفير الخصائص الخاصة بالمنتج، وإرشادات الاستخدام، ومعلومات التعامل في ورقة بيانات المنتج ذات الصلة ورقة بيانات السلامة.
تواصل مع فريقنا التقني